BKFRQ - 620201 TYLOK PLUS FAST SET
- MSDS: BKFRQ
- Manufacturer: CAULK DENTSPLY
- Product Name: 620201 TYLOK PLUS FAST SET
- National Stock Number: 6520-00F016079
Product Identification
Product ID:620201 TYLOK PLUS FAST SET
MSDS Date:03/11/1991
FSC:6520
NIIN:00F016079
MSDS Number: BKFRQ
Responsible Party
MILFORD, DE 19963-0359
Emergency Phone: (302) 422-4511
Info Phone: (302) 422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
ACRYLATE POLYMER, POLYACRYLATE, CARBOMER 941, POLYACRYLIC
CAS: 9003-01-4
RTECS: AT4680000
STANNOUS FLUORIDE, TIN DIFLUORIDE
CAS: 7783-47-3
RTECS: XQ3450000
OSHA PEL 2.5 MG/CUM
ACGIH TLV: 2.5 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: IRRITATION TO SOFT TISSUE.
EYES: IRRITATION , ADHERENCE TO TISSUES & REDNESS. SKIN:
IRRITATION, REDNESS & DRYNESS. INHALATION: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: IRRITATION TO SOFT TISSUE. EYES:
IRRITATION, ADHERENCE TO TISSUE & REDNESS. SKIN: IRRITATION,
REDNESS, & DRYNESS. INHALATION: IRRITATION.
Medical Cond Aggravated by Exposure:OPEN WOUNDS OR SORES OF THE SKIN
First Aid
First Aid:EYES/SKIN: FLUSH W/PLENTY OF WATER FOR 15 MINS. INHALATION:
REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH, GIVE PLENTY OF WATER
TO DRINK. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:DRY SAND, CO2, OR DRY CHEMICAL
Accidental Release
Spill Release Procedures:SWEEP UP SPILLED POWDER.
Handling
Handling and Storage Precautions:STORE AWAY FROM STRONG ACIDS, FOODS &
BEVERAGES.
Other Precautions:OBSERVE NORMAL WAREHOUSING & HANDLING PROCEDURES.
Exposure Controls
Respiratory Protection:LOCAL VENTILATION OR APPROVED NUISANCE DUST
MASK, IF IN LARGE QUANTITIES.
Ventilation:LOCAL EXHAUST
Protective Gloves:CLOSE FITTING RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING W/CHEMICALS.
Supplemental Safety and Health
MOISTURE OR HUMIDITY >50% WILL CAUSE MATERIAL TO HARDEN.
Chemical Properties
Spec Gravity:4.5
Solubility in Water:SLIGHT
Appearance and Odor:LIGHT PINK, FREE-FLOWING POWDER W/FAINT ACIDIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:MOISTURE (RELATIVE HUMIDITY >50%)
Hazardous Decomposition Products:OXIDES OF ZINC
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.